This is the one rivited onto the block...early ones were alloy ....these are alloy too.....this sale is just for the alloy plate...we can get them stamped / embossed correctly from below which is expensive and takes a long time we also need a copy of your reg document to cover the legal side..... we can also punch them by hand,
see other listings for punching and embossing...
3.24 inches 82mm long
0.490 inch 12.5mm wide
holes 2.49 inches 63.1mm apart
holes 0.154 inch 3.92mm diameter
holes on drilled at 2.64 inches 67mm centres
Note we also list the correct rivits